And keep your OUTLOOK EXPRESS ONLINE…
To configure a single computer follow these steps:
Configuring IP Filter Lists and Filter actions
1. Open an MMC window (Start > Run > MMC).
2. Add the IP Security and Policy Management Snap-In.
1.JPG 17.84KB 176 downloads
2.JPG 32.22KB 144 downloads
3. In the Select which computer this policy will manage window select the local computer (or any other policy depending upon your needs). Click Close then click Ok.
3.JPG 28.67KB 131 downloads
4. Right-click IP Security Policies in the left pane of the MMC console. Select Manage IP Filter Lists and Filter Actions.
4.JPG 23.52KB 116 downloads
5. In the Manage IP Filter Lists and Filter actions click Add.
5.JPG 28.3KB 114 downloads
6. In the IP Filter List window type a descriptive name (such as HTTP, HTTPS) and click Add to add the new filters.
6u.JPG 29.76KB 104 downloads
7. In the Welcome window click Next.
8. In the description box type a description if you want and click Next.
6.JPG 27.83KB 99 downloads
9. In the IP Traffic Source window leave My IP Address selected and click Next.
7.JPG 28.81KB 100 downloads
10. In the IP Traffic Destination window leave Any IP Address selected and click Next.
8.JPG 27.01KB 93 downloads
11. In the IP Protocol Type scroll to TCP and press Next.
9.JPG 29.96KB 86 downloads
12. In the IP Protocol Port type 80 (for HTTP) in the To This Post box, and click Next.
10.JPG 26.01KB 91 downloads
13. In the IP Filter List window notice how a new IP Filter has been added. Now, if you want, add HTTPS (Any IP to Any IP, Protocol TCP, Destination Port 443) in the same manner.
11.JPG 30.85KB 91 downloads
14. Now that you have both filters set up, click Ok.
12.JPG 29.8KB 83 downloads
Note: A quick reminder - You can also Block Web Browsing but Allow Intranet Traffic with IPSec.
15. Back in the Manage IP Filter Lists and Filter actions review your filters and if all are set, click on the Manage Filter Actions tab. Now we need to add a filter action that will block our designated traffic, so click Add.
13.JPG 28.47KB 73 downloads
16. In the Welcome screen click Next.
17. In the Filter Action Name type Block and click Next.
14.JPG 25.17KB 78 downloads
18. In the Filter Action General Options click Block then click on Next.
15.JPG 25.1KB 72 downloads
19. Back in the Manage IP Filter Lists and Filter actions review your filters and if all are set, click on the Close button. You can add Filters and Filter Actions at any time.
16.JPG 25.95KB 68 downloads
Next step is to configure the IPSec Policy and to assign it.
Configuring the IPSec Policy
1. In the same MMC console right-click IP Security Policies on Local Computer and select Create IP Security Policy.
17.JPG 23.49KB 70 downloads
2. In the Welcome screen click Next
3. In the IP Security Policy Name enter a descriptive name, such as "Block HTTP, HTTPS". Click Next
18.JPG 20.79KB 64 downloads
4. In the Request for Secure Communication window click to clear the Active the Default Response Rule check-box. Click Next
19.JPG 23.65KB 70 downloads
5. In the Completing IP Security Policy Wizard window, click Finish.
20.JPG 23.73KB 82 downloads
6. We now need to add the various IP Filters and Filter Actions to the new IPSec Policy. In the new IPSec Policy window click Add to begin adding the IP Filters and Filter Actions.
21.JPG 25.55KB 84 downloads
7. In the Welcome window click Next.
8. In the Tunnel Endpoint make sure the default setting is selected and click Next.
22.JPG 28.05KB 84 downloads
9. In the Network Type windows select All Network Connections and click Next.
23.JPG 24.92KB 79 downloads
10. In the IP Filter List window select one of the previously configured IP Filters, for example "HTTP, HTTPS" (configured in step #6 at the beginning of this article). If, for some reason, you did not previously configure the right IP Filter, then you can press Add and begin adding it now. When done, click Next.
24.JPG 27.35KB 79 downloads
11. In the Filter Action window select one of the previously configured Filter Actions, for example "Block" (configured in step #15 at the beginning of this article). Again, if you did not previously configure the right Filter Action, you can now press Add and begin adding it now. When done, click Next.
25.JPG 28.73KB 82 downloads
12. Notice how the IP Filter has been added.
26.JPG 23.13KB 84 downloads
Again, you can add any combination of IP Filters and Filter Actions you like.
Notice that you cannot change their order like in other full-featured firewalls. Even so, this configuration works perfectly as you will soon discover.
The next phase is to assign the IPSec Policy.
Assigning the IPSec Policy
1. In the same MMC console, right-click the new IPSec Policy and select Assign.
27.JPG 17.67KB 90 downloads
Done, you can now test the configuration by trying to surf to restricted and unrestricted websites.
Edited by torik_ad, 09 March 2010 - 07:38 PM.