Jump to content


MPLS basic configuration & Setup:

#MPLS #CCIP

  • Please log in to reply
2 replies to this topic

#1 qatarneh

qatarneh

    Newbie

  • Members
  • Pip
  • 6 posts
  • Gender:Male
  • Location:Amman-Jordan

Posted 28 December 2012 - 04:56 AM

Dears,

I will start, understanding the configuration and setup of MPLS, so any hints will help me in this, and if you have any basic setup & scenarios of MPLS "L2, L3 & VPLS"

Regards,
Tareq
  • 0

#2 martinlo

martinlo

    V.I.P. Member

  • Global Moderators
  • PipPipPipPipPip
  • 2697 posts
  • Gender:Male
  • Location:Land Of 10,000 Lakes

Posted 28 December 2012 - 05:47 AM

MPLS and VPN architecture books have some examples; otherwise, CCIE SP workbooks;
  • 0

#3 Darby Weaver

Darby Weaver

    World's Largest Home Data Center

  • Global Moderators
  • PipPipPipPipPip
  • 8293 posts
  • Gender:Male
  • Location:USA
  • Interests:Taking on new CCNA/CCNP/CCIE/CCDA/CCDP/CCDE study group members. Interested?

Posted 06 May 2013 - 11:33 AM

I like the Sybex MPLS certification book from back in the day.

It's cheap now and straight to the point.

It covers mostly everything covered by the first half of MPLS Fundamentals by Luc de Ghein from Cisco Press.

It's not that bad:

Enable ip cef
Enable MPLS globally
Enable MPLS on interfaces

Create vrf and the RD.
Create rt for import and export
Assign interfaced to the desired vrf
Re-type the IP per interface

Configure IGP or MP-BGP for associated protocol as required.
Use the address-family commands under the relative routing process.

Hope this helps

Darby Weaver

Edited by Darby Weaver, 06 May 2013 - 11:33 AM.

  • 0





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users