Jump to content

NAT in Cisco ASA version 8.4.1

  • Please log in to reply
1 reply to this topic

#1 Lak Saini

Lak Saini


  • Members
  • Pip
  • 5 posts
  • Gender:Male

Posted 09 January 2013 - 07:04 AM

I need some help on creating a NAT on Cisco ASA Firewall version 8.4.1.
1) I have a Vendor connecting to my Servers via P2P link. But the problem is the IP subnet of the servers which i am using on my end; the same subnet is also being used by the Vendor on their end. So i have come out with a plan that i will nat my servers with a range of ip address which the vendor is not using on their end.
2) But i am not sure how to write the same in 8.4.1 version of ASA.

Vendor IP address :- 10.67.1.x/24
MY Server IP address :-
MY Server NAT IP address :-

So my server lies on the inside interface of the ASA; where as the Vendor will be coming from the outside interface of the ASA.

Can any one please help me in writting the config for the same

  • 0

#2 mat1458


    Advanced Member

  • Members
  • PipPipPip
  • 240 posts

Posted 12 January 2013 - 04:31 AM

object network ON_172.16.18.10
object network ON_192.168.10.10
object network ON_10.67.1.0_24
nat (inside,outside) source static ON_172.16.18.10 ON_192.168.10.10 destination static ON_10.67.1.0_24 ON_10.67.1.0_24 no-proxy-arp

HTH mat
  • 1

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users