malijane

Members
  • Content count

    32
  • Joined

  • Last visited

Community Reputation

0 Neutral

About malijane

  • Rank
    Newbie
  1. I'm just starting out with ccum and having trouble with connection I continually get this page cannot be displayed. This is after I have logged in and are opening different menus. any help would be great thanks.
  2. At work we have a central office site and two branch office sites. the branch offices both have full server 2008 domain controllers. the system is set up so that if one of the branch office servers go down, then authentication in done at the central office. howerver due to a low budget from time to time we have both the local branch server and the connection to the central office down. is there any way in group policy that you can get users to authenticate to the other branch office server. I would like to try and set this up in a lab before trying at work, if it is possible. Thanks.
  3. Does 2008 R2 Standard support version 3 certificate templates as this link shows http://social.technet.microsoft.com/wiki/contents/articles/1137.aspx#Features or do you have to run 2008 R2 enterprise to support version 3 certificate templates as this link shows http://technet.microsoft.com/en-us/library/cc772393(WS.10).aspx any help with clearing this up would be good Thanks
  4. the other are connected through a netgear wireless router they can all surf the internet. i'm not concerned about there inter vlan connectivy. thanks
  5. ping from host 172.31.0.3 to router 172.31.0.1 Pinging 172.31.0.1 with 32 bytes of data: Reply from 172.31.0.1: bytes=32 time=1ms TTL=255 Reply from 172.31.0.1: bytes=32 time=1ms TTL=255 Reply from 172.31.0.1: bytes=32 time=1ms TTL=255 Reply from 172.31.0.1: bytes=32 time=1ms TTL=255 from router to host Internet_router#ping 172.31.0.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.31.0.3, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) debug ip packet ping from host to router ping sucessful Internet_router# *Mar 24 05:27:46.548: IP: s=172.31.0.3 (Vlan1), d=172.31.0.1, len 60, input feature, Virtual Fragment Reassembly(21), rtype 0, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:27:46.548: IP: s=172.31.0.3 (Vlan1), d=172.31.0.1, len 60, input feature, Virtual Fragment Reassembly After IPSec Decryption(32), rtype 0, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:27:46.548: IP: s=172.31.0.3 (Vlan1), d=172.31.0.1, len 60, input feature, MCI Check(64), rtype 0, forus FALSE, sendself F Internet_router#ALSE, mtu 0, fwdchk FALSE *Mar 24 05:27:46.548: IP: s=172.31.0.3 (Vlan1), d=172.31.0.1, len 60, input feature, TCP Adjust MSS(66), rtype 0, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:27:46.548: IP: tableid=0, s=172.31.0.3 (Vlan1), d=172.31.0.1 (Vlan1), routed via RIB router to host ping fail IP packet debugging is on Internet_router#ping 172.31.0.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.31.0.3, timeout is 2 seconds: *Mar 24 05:31:06.337: IP: s=0.0.0.0 (local), d=172.31.0.3, len 100, local feature, NAT(2), rtype 0, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:06.337: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending *Mar 24 05:31:06.337: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, NAT Inside(7), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:06.337: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, TCP Adj.ust MSS(40), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:06.337: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending full packet *Mar 24 05:31:08.690: IP: s=0.0.0.0 (local), d=172.31.0.3, len 100, local feature, NAT(2), rtype 0, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:08.694: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending *Mar 24 05:31:08.694: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, NAT Inside(7), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:08.694: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, TCP Adj.ust MSS(40), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:08.694: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending full packet *Mar 24 05:31:10.690: IP: s=0.0.0.0 (local), d=172.31.0.3, len 100, local feature, NAT(2), rtype 0, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:10.690: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending *Mar 24 05:31:10.690: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, NAT Inside(7), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:10.690: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, TCP Adj.ust MSS(40), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:10.690: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending full packet *Mar 24 05:31:12.690: IP: s=0.0.0.0 (local), d=172.31.0.3, len 100, local feature, NAT(2), rtype 0, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:12.690: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending *Mar 24 05:31:12.690: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, NAT Inside(7), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:12.690: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, TCP Adj.ust MSS(40), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:12.690: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending full packet *Mar 24 05:31:14.691: IP: s=0.0.0.0 (local), d=172.31.0.3, len 100, local feature, NAT(2), rtype 0, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:14.691: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending *Mar 24 05:31:14.691: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, NAT Inside(7), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:14.691: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, output feature, TCP Adj. Success rate is 0 percent (0/5) Internet_router#ust MSS(40), rtype 1, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE *Mar 24 05:31:14.691: IP: s=172.31.0.1 (local), d=172.31.0.3 (Vlan1), len 100, sending full packet as you can see the ping fails. thye reason i would like this to beable to work, is so i can boot my router from tftp server & use a different ios that doesn't fit in flash. this fails at the moment. any help would be great.
  6. the windows firewall is turned off, it doesn't matter if i'm running xp, win7 or red hat. the four computers & 1 printer that i have in my vlan can all surf the internet. all four computers canping the local gateway(877 router) but the router cannot ping the local vlan hosts, it times out. the acls are all nat related, not denying traffic. they are denying nat from changing the ip addres from a private address to a public address. if all trafficv is permitted in the nat statement then all traffic from the inside network is changed to a public address and sent over internet. check out cbt nugget icsw configuring adsl. any help with this would be great.
  7. the config is using a pppoa (ppp over atm) config this works perfectly with my ISP. My problem is i can't ping any of the hosts on Vlan 1. But the host can ping the router i.e. there default gateway. thanks
  8. windows firewall has been turned off. the deny statements are there in the acl to stop these address from nat changing the address to a public address. have only added those statement recently. i get the same result when they are removed. the ip virtual-reassembly cammand is a default router command. not added by me. thanks
  9. iam configuring my home router. i can surf the internet no problem but i can't ping the host on my local network, vlan 1. heres my config ip dhcp excluded-address 172.31.0.1 ip dhcp excluded-address 172.31.0.8 172.31.0.255 ! ip dhcp pool 172.31.0.0_SUBNET network 172.31.0.0 255.255.255.0 default-router 172.31.0.1 dns-server 218.214.17.1 218.214.228.97 ! ! ip cef ! ! interface ATM0 no ip address no atm ilmi-keepalive pvc 8/35 pppoe-client dial-pool-number 1 ! ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 shutdown ! interface FastEthernet3 shutdown ! interface Vlan1 ip address 172.31.0.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface Dialer1 ip address negotiated ip mtu 1492 ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 ppp authentication chap callin ppp chap hostname hostname.com ppp chap password 0 ######### ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 Dialer1 ip http server ip http authentication local no ip http secure-server ! ip nat inside source list NAT_ACCESS interface Dialer1 overload ! ip access-list extended NAT_ACCESS deny ip host 172.31.0.4 host 172.31.0.1 deny ip host 172.31.0.1 host 172.31.0.4 permit ip 172.31.0.0 0.0.0.255 any ! ! any help with this problem would be great thanks
  10. i have an 877 router that i want to run ips on, however it doesn't have enough flash to store an ips image. so i want to boot from a TFTP server. however whenever i boot up my router doesn't contact tftp. I have done this with other routers & even if it doesn't work the tftp server loggs the failed contact. this is my config hostname Router ! boot-start-marker boot system tftp c870-adventerprisek9-mz.124-8.YI2.bin 10.1.1.2 boot-end-marker ! ! ! ip tftp boot-interface Vlan1 ! ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Vlan1 ip address 10.1.1.1 255.255.255.0 ip nat inside ip virtual-reassembly any help with this would be great, i'm sure it somthing basic. Only just got this router. thanks
  11. i have a 837 router connected to internet through a DSL connection. off one of the Lan ports i have my home computer which works great, no problem surfacing the internet. connected to port 2 is a netgear wireless router. i can ping the net gear wireless router input interface but can't ping any of the wireless devices. input subnet is 172.20.1.0, wireless network is 192.168.1.0. when i debug arp i get this message - INTERNET_RTR#debug arp ARP packet debugging is on INTERNET_RTR#ping 192.168.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds: *Nov 23 15:46:21.115: IP ARP: creating incomplete entry for IP address: 192.168.1.1 interface Ethernet2 *Nov 23 15:46:21.115: IP ARP: sent req src 172.16.1.1 0013.1a63.0575, dst 192.168.1.1 0000.0000.0000 Ethernet2. *Nov 23 15:46:23.115: IP ARP: sent req src 172.16.1.1 0013.1a63.0575, dst 192.168.1.1 0000.0000.0000 Ethernet2. there is no mac entry for the subnet. any help would be good.
  12. IPS

    has anyone managed to configure a dynamips router for IPS using SDM? i have tried quite a few IOSs. i can configure IPS manually through the CLI, but when i open the router with sdm it tells me the ips feature is unavailable. any help would be great.
  13. thanks for your help i'm up & running now
  14. hi i have just started ccna security, i have set up a windows 2003 server & installed acs evaluation software (90 days). however when i launch the program i get an address in the top bar an a blank page. i'am win explorer 6.0 as it says i should be in the instructions. the win server has no other software other than java on it. thanks any help would be great.
  15. yes i passed the ont exam 2 months ago