AJ768

Members
  • Content count

    39
  • Joined

  • Last visited

  • Days Won

    1

AJ768 last won the day on September 1 2010

AJ768 had the most liked content!

Community Reputation

3 Neutral

About AJ768

  • Rank
    Newbie

Profile Information

  • Gender
    Male
  • Location
    Mumbai
  • Interests
    Technology & Speed
  1. Hey Mark, Please don’t say sorry, I am very grateful to you for the support…I am traveling today & thus, will check these details when possible & let you know the progress; Thank You Again, AJ
  2. @Mark Do i need to give this command on both the routers? Also, please find below config of both our routers, while will give you better idea of the running configuration...please note that route to 110.X.X.2 mentioned in below config is the public IP address of our Load Balancer; ISP1 Router:- (This is 20MB ILL) Net-Rtr02#sh run Building configuration... Current configuration : 1841 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Net-Rtr02 ! boot-start-marker boot-end-marker ! enable secret 5 $1$o2Xo$vYufMyMk2GnHT/RTP4Qjp. ! no aaa new-model ! ! ip cef ! ! ip name-server 121.X.X.X ip name-server 121.X.X.X multilink bundle-name authenticated ! ! ! ! ! ! vlan internal allocation policy ascending ! ! ! interface FastEthernet0/0 description ***ISP1 Internet Link*** no ip address load-interval 30 duplex full speed 100 ! interface FastEthernet0/1 description ***ISP1 Lan Pool*** ip address 110.X.X.1 255.255.255.0 load-interval 30 duplex full speed auto ! interface FastEthernet0/1/0 ip address 14.X.X.110 255.255.255.252 load-interval 30 duplex full speed 100 ! router bgp 45232 bgp log-neighbor-changes neighbor 14.X.X.109 remote-as 4755 ! address-family ipv4 redistribute connected redistribute static neighbor 14.X.X.109 activate no auto-summary no synchronization network 110.X.X.0 mask 255.255.255.0 exit-address-family ! ip route 0.0.0.0 0.0.0.0 14.X.X.109 ip route 110.X.X.4 255.255.255.255 110.X.X.2 ip route 110.X.X.5 255.255.255.255 110.X.X.2 ip route 110.X.X.6 255.255.255.255 110.X.X.2 ip route 110.X.X.7 255.255.255.255 110.X.X.2 ip route 110.X.X.8 255.255.255.255 110.X.X.2 ip route 110.X.X.9 255.255.255.255 110.X.X.2 ip route 110.X.X.10 255.255.255.255 110.X.X.2 ip route 110.X.X.13 255.255.255.255 110.X.X.2 ip route 110.X.X.14 255.255.255.255 110.X.X.2 ip route 110.X.X.15 255.255.255.255 110.X.X.2 ! ! no ip http server no ip http secure-server ! ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 password XXXXXXXXXXX login ! scheduler allocate 20000 1000 ! end Net-Rtr02# ISP2 Router: (This is 6MB ILL) Net-Rtr01#sh run Building configuration... Current configuration : 1770 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Net-Rtr01 ! boot-start-marker boot-end-marker ! enable secret 5 $1$IIFZ$ZbJhsBMb6RGDBvhPjENCe1 ! no aaa new-model ! ! ip cef ! ! ip name-server 121.X.X.X ip name-server 121.X.X.X multilink bundle-name authenticated ! ! ! archive log config hidekeys ! ! ! ! ! interface FastEthernet0/0 description ***BGP LAN IPs*** ip address 110.X.X.20 255.255.255.0 duplex full speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1/0 description ***ISP2 WAN IP*** ip address 182.X.X.42 255.255.255.252 duplex full speed 100 ! router bgp 45232 bgp log-neighbor-changes neighbor 182.X.X.41 remote-as 9498 ! address-family ipv4 redistribute connected redistribute static neighbor 182.X.X.41 activate no auto-summary no synchronization network 110.X.X.0 mask 255.255.255.0 exit-address-family ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 182.X.X.41 ip route 110.X.X.4 255.255.255.255 110.X.X.2 ip route 110.X.X.5 255.255.255.255 110.X.X.2 ip route 110.X.X.6 255.255.255.255 110.X.X.2 ip route 110.X.X.7 255.255.255.255 110.X.X.2 ip route 110.X.X.8 255.255.255.255 110.X.X.2 ip route 110.X.X.9 255.255.255.255 110.X.X.2 ip route 110.X.X.10 255.255.255.255 110.X.X.2 ip route 110.X.X.13 255.255.255.255 110.X.X.2 ip route 110.X.X.14 255.255.255.255 110.X.X.2 ip route 110.X.X.15 255.255.255.255 110.X.X.2 ! ! ip http server ! ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 password XXXXXXXX login ! scheduler allocate 20000 1000 ! end Net-Rtr01# Thank You -AJ
  3. Hi, Brief diagram of our Network setup:- Link :- https://docs.google.com/open?id=0B0UmKrwjh8OTYXVtdTlOanN2SVk BGP has been configured on both the routers in such a way that, if any one of the links goes down then the other one takes over…a common set of public IP Pool is allowed from both ISP networks; But, we have checked on our Load Balancer Inbound & Outbound traffic details of both ISP’s & found that, only ISP2 link is getting fully unitized for Inbound & outbound traffic…were as ISP1 link is only being used for Outbound traffic & no inbound traffic is coming from this link (As per ISP1, they have checked Point-Point connectivity from their end & 20MB bandwidth is coming tell our point) but the problem is that we are unable to use that 20MB as there is no inbound traffic following from this link; Kindly suggest, what we need to check or what could be the problem at our end? Can we or how can we use total 26MB of our Internet bandwidth? Thanks, -AJ
  4. Problem resolved :-) 2008 was not resolving DNS as in forwarder tab (6nos Public IP’s) already defined since beginning, 1st,2nd 5th DNS IP's where not reachable (these belong to old ISP)…as suggested by talent pk earlier, I had added google’s public DNS 8.8.8.8 in 1st place & then DNS quires got resolved; In 2003 removed the same unreachable old ISP Public DNS from 3rd , 5th & 6th & replaced them with current ISP’s public DNS today… this has now resolved the problem; Thank You both for your valuable suggestions :-) But, i am unable to understand why the 2003 was not able to resolve DNS if it's 1st DNS was reachable & only 3rd, 5th & 6th were not reachable! :-( -AJ
  5. Yes, DCPROMO is already run on 2008...it has ADDS + DNS roles installed; fyi ...2003 currently holds all 5 FSMO; Thanks,
  6. Dear Mark, Finally figured out the option to confirm which one is the Primary DNS & Secondary DNS Server in DNS Console…stupid me, long way to go for me to master DNS for sure ;-) Now, 2003 is our Primary DNS Server which is currently not able to resolve DNS & 2008 is the Secondary DNS Server which has started resolving DNS after adding ISP DNS in forwarder tab (As suggested by You & talentpk); i.e. if I allow zone transfer from 2003 to 2008 (Allow zone transfers check box is not selected on Primary DNS Server)…will it stop DNS resolution happening from 2008…if so, then both will stop resolving DNS & I would be in a soup No, I have not tried unauthorizing and re-authorizing the DHCP server as of now; Thank You, -AJ
  7. @talent pk ...have added all the DNS Server provided by the ISP in forwarder & then restarted DNS Service...now 2008 is able to resolve the DNS quires but, 2003 has stopped resolving DNS...can't understand what's gone wrong;
  8. Thanks, Forward to ISP DNS is a Key word & that answers my question :-) I earlier, assumed that Forward was for public DNS such as Google; -AJ
  9. Thank You for responding to my question :-) As per my understanding , it is always the best practice that, DNS Server should resolve the quires on itself using Root Hints and should not use forwarders (Public DNS) as it may lead to security risk…please correct me if I am wrong; Also, We have one 2008 DC & one 2003 DC (All FSMO roles are on 2003)….how can I verify which one is the First DNS Server (Sorry, but I am still learning on DNS);
  10. {Not able to resolve DNS from primary domain controller: 2008…DNS getting resolved from all secondary domain controller running: 2003} Hi, We are not able resolve DNS from primary domain controller which is Windows 2008 (running on 2003 Domain & Forest Functionality Level)…but, all the DNS quires are getting resolved from all other secondary domain controller running: 2003 on same Network & also from different sites; Have also disabled EDNS0 incase our firewall doesn't support it (For 2008)...but, it didn't help; DNS Server & Client Service is started & running without any problem; If we launch NSLOOKUP from 2008 DNS Console...we are getting below results:- "Default Server: dc01.ourdomain.com Address: 172.16.X.X > www.yahoocom Server: dc01.ourdomain.com Address: 172.16.X.X DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to dc01.ourdomain.com timed-out" If we change the primary DNS IP in network properties on 2008 to 2003 server IP (which has no problem resolving the DNS on the same network) we still get the same above error :-( Currently using DNS Forwarding till we find some solution to this problem; Kindly Advice; Thanks, AJ
  11. Hi, Which is the best open source chat server? I have already downloaded & testing “OpenFire”+Spark client for past 2-3 days but, not able to integrate MS SQL Express & LDAP (Root DC is Windows 2008 with 2003 Domain & Forest Level functionality); Integration with AD is a required, as it makes my life easy ….any suggestion please; Thanks, AJ
  12. Google below PDF's & Download fortigate-cli-40-mr3 Fortigate-System-Admin-40-MR3 fortios-handbook-40-mr3
  13. We have faced similar problems with ISA 2006 & hence, bought Fortigate Internet Firewall from Fortinet 3 years back; Since then, it is very peaceful with Fortigate…we found ISA to be highly unreliable! -AJ
  14. I Access this forum only when i have time...therfor this delay; 1-can I use normal windows xp or I should put 2003? - You would need 2003 2-and if it is better to put it under our network without effect my band width like add hardisk and link this URL on our web? - External Network HDD 3-can anyone give me the proper solution to use this option without any effects at my network at all? - Creating FTP Server on 2003 / 2008 is a good option, but i am not aware about any options that can allow you to create FTP Server & also not effect your bandwidth! try googling
  15. You may find the Article published in below link to be useful http://www.windowsnetworking.com/articles_tutorials/creating-configuring-ftp.html