sangey

Members
  • Content count

    43
  • Joined

  • Last visited

Community Reputation

-3 Poor

About sangey

  • Rank
    Newbie
  1. In Lab 5, i have 2 doubts... HSRP timers by default is 3 sec and 15 hello packets (1x5). Question says standby will take up active role in a second if 5 hello packets not received. Solution given is standby 0 timers 3 16. I feel the solution could be standby 0 timers 4 20. This is because we add one sec and even hello packets need to be added. Zone based Firewall. Both rules are just pass and pass for source and destination. Then why we are force to put zone B facing BB while zone A facing the networks. I feel in this situation zone A or B could work because both have same rule pass and pass. Please assit. mohdsangey@yahoo.com
  2. Hi, My lab exam is on 21 Oct in Dubai. Please can we know those TS and Labs are exectly same in the exam or there are some changes. Those who attempted already please advice... We would like to know those changes.
  3. VTP

    Hi, I have another question. i configured spanning-tree between port 15 and 7 with cost 1 and 10 simultaneously. So port 15 is root and port 7 is in block state. Now surprising thing is that i can see traffic about 1.5mb on port 7 while its in block state. From my knowledge if port 7 is in block, there shouldn't be any traffic or less traffic 1k for hello packets only. Please assist.
  4. Hi, i have 2 cisco layer 2 switches 2950. Cables from both switches are connected to D-Link switch. Now i want to configure one switch as primary and sec and backup but it should be automatic redundacy. i have tried with STP, but STP works only locally when both cables connect to same switch. Please assist.
  5. Hi, I have configured IPs into different vlans and all are reachable except antenna IPs which are between trunks. Where should i configure gateway of antenna IPs as they are trunk and not under vlans. Please assist.
  6. VTP

    I have no issue with this configuration... just asking if there is way to bypass vtp for some interfaces only.
  7. VTP

    Hi, So do you mean, that is not possible at all. Actually i have switch in vtp client mode. i need 1 - 2 interface with vlan 20 which is not under vtp as separate.
  8. VTP

    Hi, I am little confused here. How can i disable STP as below are the options. Second my switch is vtp client mode, how can i be able to create vlan while only server has authority to create vlans. int fa0/6 (config-if)#switchport access vlan 20 %VTP VLAN configuration not allowed When device is in CLIENT mode. (config-if)# int fa0/6 (config-if)#no spanning-tree ? bpdufilter Don't send or receive BPDUs on this interface bpduguard Don't accept BPDUs on this interface cost Change an interface's spanning tree port path cost guard Change an interface's spanning tree guard mode link-type Specify a link type for spanning tree protocol use mst Multiple spanning tree port-priority Change an interface's spanning tree port priority portfast Enable an interface to move directly to forwarding on link up stack-port Enable stack port vlan VLAN Switch Spanning Tree
  9. VTP

    Dear All, switch is configured in vtp mode client. I want to configure fa0/23 - 24 without vtp. Is it possible??? i mean to those two interface should be member of vlan 20 which is not in vtp. Please assist.
  10. Hi Guys, I feel the problem is cisco switch which i am planning to change. This is the switch connected to router directly. I will let you know the output and explain you entire situation. I erased startup of the cisco switch 2960, crypto config was not there. But when i restart the switch it appears again as shown below. Please assist. crypto pki trustpoint TP-self-signed-2212797824 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-2212797824 revocation-check none rsakeypair TP-self-signed-2212797824 ! ! crypto pki certificate chain TP-self-signed-2212797824 certificate self-signed 01 3082023F 308201A8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030 31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274 69666963 6174652D 32323132 37393738 3234301E 170D3933 30333031 30303031 31365A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649 4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 32313237 39373832 3430819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281 8100C4CF 8AF840EC CDF67DB4 D35073F1 79004200 F75F9745 65876412 527F4547 8B494BD8 2FFC6A7D 5C9FC55A FADCA516 CFF19E8E 5892E60B A8CC4869 211597B5 C9BB6CE5 A015FD66 6CE4F706 2A8A3787 8B5F74BF 031A6589 64C0114F A1D658C0 60231226 CC327EA1 A2D345ED A631EE6E 583AA16F 4A55F4D9 FDF8CE63 1636F095 4C7B0203 010001A3 67306530 0F060355 1D130101 FF040530 030101FF 30120603 551D1104 0B300982 07537769 7463682E 301F0603 551D2304 18301680 14D3351F 9EA89FDE 9466DD4D 82CC3039 FE7B1ACC 3C301D06 03551D0E 04160414 D3351F9E A89FDE94 66DD4D82 CC3039FE 7B1ACC3C 300D0609 2A864886 F70D0101 04050003 8181005C 95DCC074 6F60156E C507DB9C 581CE210 A448680A 39F2010A B17EB4A8 61A733B2 31BC938E 63A8C8FE E564A11F A0C97C69 A43088A9 B7F858C8 EE9AAA12 81F73166 AC01427F 8C5BC84A F9AC7BDD 0C2976C7 C73372B5 3FB98391 D5AAF191 8096EAA2 CB053120 A06CC5FB D78A356B E2F82292 C115210D 25CEF0E4 80D12D00 EC5B6
  11. Hi, I have one more interface from router to my switch. So it means two cables from router to switch.Second int configuration is as follows: int g0/3 ip address 1.2.3.4. 255.255.255.224 Still investigating where could be the problem.
  12. Dear Sir, Please can you suggest what should i check in the configuration. i have got configuration of 10 pages.
  13. I have 10 switches with VTP client. They all synchronize without any problem.
  14. Hi, I experience Loop problem in my network infrastructure. To avoid that i configured each network in different vlans by using router on a stick. But unfortunately loop still exist and affects entire network. Can anyone assist how to solve this issue. Cisco Router Config: int g0/0 no ip address int g0/0.10 encapsulation dot1q 10 ip address x.x.x.x 255.255.255.248 int g0/0.20 encapsulation dot1q 20 ip address y.y.y.y 255.255.255.240 Cisco Switch 2960 Config: int fa0/0 switchport mode trunk int fa0/10 switchport mode access switchport access vlan 10 int fa0/20 switchport mode access switchport access vlan 20 vtp mode server vtp version 2 vtp password xxx vtp domain aaa Remarks: VTP works perfect without any issue. Loop Testing: int fa0/21 switchport mode access switchport access vlan 20 Practical : Connected D-Link switch to port No. 21 and created same cable both interfaces of the D-Link switch. This loop even affected vlan 10. Actually separate vlans, broadcast are prevented, but in my case broacast affects. Regards Mohamed Skype: mohamedsangey
  15. Hi. Already sorted out by replacing layer 2 to layer 3 in the configuration.