Search the Community
Showing results for tags 'CUCM'.
Found 3 results
Please see the list below CCNA , CCNP , CCIE Voice rack All are in VERY good condition - Please PM me HQ Site 1 x Cisco 2811 Router CISCO2811 2811 with AC PWR ( Refurbished ) 1 x VWIC-1MFT-T1 VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1 1 x HWIC-4ESW (Non Poe ) HWIC-4ESW Four port 10/100 Ethernet switch interface card 1 x WIC-2T WIC-2T 2-Port Serial WAN Interface Card 1 x PVDM2-16 PVDM2-16 16-Channel Packet Voice/Fax DSP Module Site B Site 1 x Cisco 2811 Router CISCO2811 2811 with AC PWR ( Refurbished ) 1 x VWIC-1MFT-T1 VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1 1 x HWIC-4ESW (Non Poe ) HWIC-4ESW Four port 10/100 Ethernet switch interface card 1 x WIC-1T WIC-1T 1-Port Serial WAN Interface Card 1 x PVDM2-16 PVDM2-16 16-Channel Packet Voice/Fax DSP Module Site C Site 1 x Cisco 2811 Router CISCO2811 2811 with AC PWR ( Refurbished ) 1 x AIM-CUE AIM-CUE Cisco Unity Express Network Module (includes 12-VM) 1 x HWIC-4ESW (Non Poe ) HWIC-4ESW Four port 10/100 Ethernet switch interface card 1 x VWIC-1MFT-E1 VWIC-1MFT-E1 1-Port RJ-48 Multiflex Trunk - E1 1 x WIC-1T WIC-1T 1-Port Serial WAN Interface Card 1 x PVDM-12 PVDM-12 12-Channel Packet Voice/Fax DSP Module PSTN Simulator / FR Switch 1 x Cisco 3725 Router with AC PWR ( Refurbished ) 1 x VWIC-2MFT-T1 VWIC-2MFT-T1 2-Port RJ-48 Multiflex Trunk - T1 1 x VWIC-1MFT-E1 VWIC-1MFT-E1 1-Port RJ-48 Multiflex Trunk - E1 1 X NMHDV 1 x WIC-2T WIC-2T 2-Port Serial WAN Interface Card 1 x WIC-1T WIC-1T 1-Port Serial WAN Interface Card 1 x PVDM2-32 PVDM2-32 32-Channel Packet Voice/Fax DSP Module IP Phones 6 x 7960G IP Phones CP-7960G 6 Cisco CP-PWR-CUBE VoIP Phone Power Supply for 7960 series IP Phone Voice ESXI Server 1 TB HDD , 16 GB RAM , i7 Processor , ESXi OS Customized for Intel Desktop Server installed 1x CallManager Publisher 7.0 with snapshot 1x CallManager Subscriber 7.0 with snapshot 1x Unity Connection 7.0 with snapshot 1X Contact Center Express 7.0 with snapshot 1X Presence Server 7.0 with snapshot 1 X Esxi Server 3 x CUP Clients 1 x CIPC CLient Cable 4 x Serial back-to-back cable 1 x Console Cable 1 x CAB-V35MT Cable 2 x CAB-SS-V35MT Cable 2 x T1 Cables 1 x E1 Cable IOS All router have 12.4 IOS for HQ , Site B , Site C and PSTN/FR is as per Cisco CCIE Blueprint
I’m looking for a new set of eyes. I’m in the process of building a CCIE voice lab. I have everything needed, but I’ve come to a bump in the road. I can’t seem to access the server, which is on a 192.168.2.0 network. I’ve tweaked the lab so many times, I’m sure there are a few more holes in it. I need any help I can get, thanks for your time. Here’s a rundown on the network. Modem ↓ Wireless Router: 192.168.6.0 DHCP 192.168.6.2 192.168.6.225 ↓ Switch (Layer2): Vlan 1 192.168.6.99 ↓ HQ 2610 Router:192.168.6.0 (through dhcp) and 1950 Dell Server: CUCM: 192.168.2.0 Switch2#sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/3, Fa0/6, Fa0/8, Fa0/10, Fa0/18, Fa0/21, Fa0/22, Fa0/23, Gi0/1, Gi0/2 2 SERVER active Fa0/11, Fa0/15, Fa0/17, Fa0/24 3 DATA active Fa0/9, Fa0/13 4 VOICE active Fa0/2, Fa0/4 1002 fddi-default active 1003 token-ring-default active 1004 fddinet-default active 1005 trnet-default active Switch2#sh run interface FastEthernet0/5 description CONNECTION TO CME ROUTER switchport trunk encapsulation dot1q switchport mode trunk ! interface FastEthernet0/7 description CONNECTION TO WIRELESS ROUTER duplex full speed 100 switchport access vlan 2 switchport trunk encapsulation dot1q switchport mode trunk interface FastEthernet0/13 description CONNECTION TO LAPTOP duplex full speed 100 switchport access vlan 3 ! interface FastEthernet0/17 description CONNECTION TO CUCUM SERVER switchport access vlan 2 interface FastEthernet0/24 description CONNECTION TO CUCUM SERVER duplex full speed 100 switchport access vlan 2 CMEROUTER# ip dhcp excluded-address 192.168.3.1 192.168.3.149 ip dhcp excluded-address 192.168.3.171 192.168.3.254 ip dhcp excluded-address 192.168.2.2 192.168.2.250 ip dhcp excluded-address 192.168.4.1 192.168.4.250 ip dhcp pool ITS network 192.168.4.0 255.255.255.0 default-router 192.168.4.1 option 150 ip 192.168.2.202 ! ip dhcp pool data import all network 192.168.3.0 255.255.255.0 default-router 192.168.3.1 dns-server 184.108.40.206 220.127.116.11 lease infinite ! interface FastEthernet0/0.1 encapsulation dot1Q 1 ip address dhcp ip virtual-reassembly ! interface FastEthernet0/0.2 description SERVER encapsulation dot1Q 2 native ip address 192.168.2.1 255.255.255.0 ! interface FastEthernet0/0.3 description DATA LAN INTERFACE encapsulation dot1Q 3 ip virtual-reassembly ! interface FastEthernet0/0.4 description VOICE encapsulation dot1Q 4 ip address 192.168.4.1 255.255.255.0 ip helper-address 192.168.2.201 ip helper-address 192.168.2.202 ip route 192.168.2.0 255.255.255.0 FastEthernet0/0.2 ip route 192.168.4.0 255.255.255.0 FastEthernet0/0.4 CMEROUTER#sh ip int bri Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES NVRAM up up FastEthernet0/0.1 192.168.6.12 YES DHCP up up FastEthernet0/0.2 unassigned YES NVRAM up up FastEthernet0/0.3 unassigned YES NVRAM up up FastEthernet0/0.4 192.168.4.1 YES NVRAM up up
I am looking to build a part-virtual, part-real equip lab for cvoice that can carry into the CCIE level even if it happens to include cucm 9 by then. I have a 6-core server with 16g ram and have VMWare workstation now. I can include a couple of quad nics for virtual nodes and GNS3 routers. I will run 3725 for MPLS WAN in GNS3. I can cable the routers cloud interface from GNS3 to a 3560 switch. To keep prices low, I was thinking of just one 24 port 3560 PoE. I think I can plug all routers and nodes from different sites into the single switch with SVI interfaces/ VLANs. I was thinking as long as the nodes and their accompanying default-router were on the same subnet on the switch, they can be seen as seperate sites. I have access to Server 2008 R2 for AD, DHCP, and DNS to run virtual as well as CUCM 8.6 for now. I also have exchange server and linc server also. For Routers I was thinking of a 2801 and 3611xm for branch offices, and a 3611xm for the HQ gateway. I have my CCNA as of early this yr, and am going through a hands-on program for CCNA Voice that ends in 1.5 months from now. I don't know too much about Voice yet so am posting this. I want to keep the cost low, but not at the sacrifice of learning. I thought the 12.4T on the 2611xm routers would be fine working with the 2801 and CUCM server, but please give me your thoughts. I didn't think I needed more than one switch to attach phones from different locations to test SRSV and whatnot. How can I simulate the PSTN in my NW? Are their any similar routers to the 2611XM for voice gateways that are cheaper? I need all gateways to have 2-16 DSP's, and to test PSTN fallover too.