Jump to content


Cisco 877W Firmware?


  • Please log in to reply
4 replies to this topic

#1 Blobby2006

Blobby2006

    Newbie

  • Members
  • Pip
  • 3 posts

Posted 01 February 2011 - 06:45 AM

Does anybody have the 4.0.195 firmware for the Cisco 877W router? Thanks in advance. :huh:
  • 0

#2 MarkinManchester

MarkinManchester

    Village Elder

  • Veterans
  • PipPipPipPipPip
  • 3956 posts
  • Gender:Male
  • Location:Manchester

Posted 01 February 2011 - 06:48 AM

I have AMR-4.0.015.bin for the alcatel ATM interface but not the version you mention, are there any benifits with that version ??

Mark
  • 1

#3 Blobby2006

Blobby2006

    Newbie

  • Members
  • Pip
  • 3 posts

Posted 01 February 2011 - 06:56 AM

I have AMR-4.0.015.bin for the alcatel ATM interface but not the version you mention, are there any benifits with that version ??

Mark


There have been reports on various forums that the Cisco 877 may have some trouble with the ADSL2+ equipment that British Telecom are using - the suggested solution was to use 4.0.195 firmware (AFAIK).
  • 0

#4 MarkinManchester

MarkinManchester

    Village Elder

  • Veterans
  • PipPipPipPipPip
  • 3956 posts
  • Gender:Male
  • Location:Manchester

Posted 01 February 2011 - 07:34 AM

Hi

Try the following


config-if)#dsl operating-mode ?
adsl2 ITU G.992.3 Annex A and L
adsl2+ ITU G.992.5 Annex A
ansi-dmt ANSI T1.413
auto auto detect mode
itu-dmt ITU G.992.1 Annex A

I have found the AMR version that I am running to be stable enough, higher speeds are doomed to failure with my local exchange but I can maintain a 6mb connection for months without a reload

Mark
  • 1

#5 Blobby2006

Blobby2006

    Newbie

  • Members
  • Pip
  • 3 posts

Posted 01 February 2011 - 07:40 AM

OK, I'll give that a go ... my line has just been switched over and is in the 10 day training period (currently using a NetGear router) so I'll wait until things stabilise.
  • 0





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users