4 replies to this topic

[Blobby2006]

Does anybody have the 4.0.195 firmware for the Cisco 877W router? Thanks in advance.

[MarkinManchester]

I have AMR-4.0.015.bin for the alcatel ATM interface but not the version you mention, are there any benifits with that version ??

Mark

[Blobby2006]

I have AMR-4.0.015.bin for the alcatel ATM interface but not the version you mention, are there any benifits with that version ??

Mark

There have been reports on various forums that the Cisco 877 may have some trouble with the ADSL2+ equipment that British Telecom are using - the suggested solution was to use 4.0.195 firmware (AFAIK).

[MarkinManchester]

Hi

Try the following


config-if)#dsl operating-mode ?
adsl2 ITU G.992.3 Annex A and L
adsl2+ ITU G.992.5 Annex A
ansi-dmt ANSI T1.413
auto auto detect mode
itu-dmt ITU G.992.1 Annex A

I have found the AMR version that I am running to be stable enough, higher speeds are doomed to failure with my local exchange but I can maintain a 6mb connection for months without a reload

Mark

[Blobby2006]

OK, I'll give that a go ... my line has just been switched over and is in the 10 day training period (currently using a NetGear router) so I'll wait until things stabilise.