Sign in to follow this  
Followers 0
mufti

AIR-AP125G startup

2 posts in this topic

I have just unpacked a brand new AIR-AP125G and powered it up.

 

It goes through the bootup sequence ok but hugs before the prompt. Iam not able to perform the initial configuration of the AP.

 

Below is the info am getting from the console

 

 

cisco AIR-AP1252G-E-K9 (PowerPC 8349) processor (revision C0) with 49142K/16

384K bytes of memory.

Processor board ID FCZ1428P00C

PowerPC 8349 CPU at 533Mhz, revision number 0x0031

Last reset from power-on

1 Gigabit Ethernet interface

1 802.11 Radio(s)

 

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: C8:4C:75:2C:9B:10

Part Number : 73-10425-06

PCA Assembly Number : 800-27630-06

PCA Revision Number : B0

PCB Serial Number : FOC14262V92

Top Assembly Part Number : 800-29528-03

Top Assembly Serial Number : FCZ1428P00C

Top Revision Number : A0

Product/Model Number : AIR-AP1252G-E-K9

 

 

 

Press RETURN to get started!

 

 

*Mar 1 00:00:06.215: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t

est passed

*Mar 1 00:00:06.987: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self

test passed on interface Dot11Radio 0

*Mar 1 00:00:09.043: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state

to up

*Mar 1 00:00:10.043: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0, changed state to up

*Mar 1 00:00:54.991: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a

dministratively down

*Mar 1 00:00:55.003: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(10b)JDA3, RELEAS

E SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright © 1986-2009 by Cisco Systems, Inc.

Compiled Sun 07-Jun-09 03:50 by prod_rel_team

*Mar 1 00:00:55.003: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a c

old start

*Mar 1 00:00:56.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan

ged state to up

*Mar 1 00:00:56.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio

0, changed state to down

*Mar 1 00:01:03.231: %CDP_PD-4-POWER_OK: Full power - HIGH_POWER_CLASSIC inline

power source

 

 

Any help will be appreciated.

0

Share this post


Link to post
Share on other sites

Normal startup:

 

Loading "flash:/c1250-k9w7-mx.124-10b.JDA3/c1250-k9w7-mx.124-10b.JDA3"...#######

################################################################################

################################################################################

###########################################

 

File "flash:/c1250-k9w7-mx.124-10b.JDA3/c1250-k9w7-mx.124-10b.JDA3" uncompressed

and installed, entry point: 0x3000

executing...

 

Restricted Rights Legend

 

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

© of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

© (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

 

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

 

 

 

Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(10b)JDA3, RELEAS

E SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright © 1986-2009 by Cisco Systems, Inc.

Compiled Sun 07-Jun-09 03:50 by prod_rel_team

Image text-base: 0x00003000, data-base: 0x01000000

 

Initializing flashfs...

 

flashfs[1]: 150 files, 7 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 31868928

flashfs[1]: Bytes used: 6408192

flashfs[1]: Bytes available: 25460736

flashfs[1]: flashfs fsck took 4 seconds.

flashfs[1]: Initialization complete....done Initializing flashfs.

 

Warning: the compile-time code checksum does not appear to be present.

Radio 1 A600 8000 0 0 A8030000 30

Radio 1 A600 8000 0 0 B8030000 13

tx_paks 1293

tx_paks 646

 

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

If you require further assistance please contact us by sending email to

export@cisco.com.

 

cisco AIR-AP1252AG-A-K9 (PowerPC 8349) processor (revision C0) with 49142K/16

384K bytes of memory.

Processor board ID FTX134790XK

PowerPC 8349 CPU at 533Mhz, revision number 0x0031

Last reset from power-on

1 Gigabit Ethernet interface

2 802.11 Radio(s)

 

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: C4:7D:4F:39:40:12

Part Number : 73-10425-06

PCA Assembly Number : 800-27630-06

PCA Revision Number : B0

PCB Serial Number : FOC134454XG

Top Assembly Part Number : 800-29039-03

Top Assembly Serial Number : FTX134790XK

Top Revision Number : A0

Product/Model Number : AIR-AP1252AG-A-K9

Selected country United States

 

 

 

Press RETURN to get started!

 

 

*Mar 1 00:00:06.199: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t

est passed

*Mar 1 00:00:07.023: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self

test passed on interface Dot11Radio 0

*Mar 1 00:00:07.531: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self

test passed on interface Dot11Radio 1

*Mar 1 00:00:09.623: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state

to up

*Mar 1 00:00:09.659: %SYS-5-CONFIG_I: Configured from memory by console

*Mar 1 00:00:09.659: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(10b)JDA3, RELEAS

E SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright © 1986-2009 by Cisco Systems, Inc.

Compiled Sun 07-Jun-09 03:50 by prod_rel_team

*Mar 1 00:00:09.659: %SNMP-5-COLDSTART: SNMP agent on host SurveyAP is undergoi

ng a cold start

*Mar 1 00:08:08.027: %SSH-5-ENABLED: SSH 1.99 has been enabled

*Mar 1 00:08:08.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0, changed state to down

*Mar 1 00:08:08.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan

ged state to up

*Mar 1 00:08:08.523: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r

eset

*Mar 1 00:08:08.523: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r

eset

*Mar 1 00:08:10.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio

1, changed state to down

*Mar 1 00:08:10.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio

0, changed state to down

*Mar 1 00:08:11.307: %CDP_PD-4-POWER_OK: Full power - INJECTOR_DETECTED inline

power source

*Mar 1 00:08:11.319: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up

 

*Mar 1 00:08:11.327: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

 

*Mar 1 00:08:12.311: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio

1, changed state to up

*Mar 1 00:08:12.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio

0, changed state to up

*Mar 1 00:08:25.915: %PKI-6-AUTOSAVE: Running configuration saved to NVRAM

 

Are you powering the AP via power supply or POE? Try the power supply? Otherwise return it for a new one, however it could be a IOS load, or you could try reseating the radio cards?

 

Good Luck!!!

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0