Hi guys,
I recently purchased AIR-BR1310G-E-K9 but needed AIR-BR1310G-E-K9-R. Can someone help me to clarify the following points, please?
- It came without RG-6 (coaxial) cable and I could not find what the part code is. What part code I can use to get this?
- Is it possible to add RP/TNC connectors to AIR-BR1310G-E-K9 in order to make it AIR-BR1310G-E-K9-R? OR Do I have to get a new unit?
Thanks a lot.
0
AIR-BR1310G-E-K9-R
Started by
ITPro999
, Sep 21 2011 01:23 AM
3 replies to this topic
#1
ITPro999
-
- Members
-
- 216 posts
Advanced Member
- Gender:Male
- Location:London
Posted 21 September 2011 - 01:23 AM
#2
MarkinManchester
-
- Veterans
-
- 3928 posts
Village Elder
- Gender:Male
- Location:KABUL
Posted 21 September 2011 - 02:12 AM
Hi guys,
I recently purchased AIR-BR1310G-E-K9 but needed AIR-BR1310G-E-K9-R. Can someone help me to clarify the following points, please?
- It came without RG-6 (coaxial) cable and I could not find what the part code is. What part code I can use to get this?
- Is it possible to add RP/TNC connectors to AIR-BR1310G-E-K9 in order to make it AIR-BR1310G-E-K9-R? OR Do I have to get a new unit?
Thanks a lot.
Use a COAX-UTP ethernet converter or just make this AP a child of one of your others?
Mark
#3
sirkozz
-
- Technical Experts
-
- 375 posts
Wireless Expert
- Gender:Male
- Location:always somewere in North America
Posted 28 September 2011 - 09:31 PM
The RG-6 is just RG-6; you can make this yourself, just make sure to use outdoor connectors.
As to adding RP-TNC connectors, just order the (-R) version and you’ll be all set.
As to adding RP-TNC connectors, just order the (-R) version and you’ll be all set.
#4
Kunal Singh
-
- Members
-
- 6 posts
Newbie
Posted 11 February 2012 - 05:06 AM
@ITPro999
Please see my response inline
- It came without RG-6 (coaxial) cable and I could not find what the part code is. What part code I can use to get this?
- Is it possible to add RP/TNC connectors to AIR-BR1310G-E-K9 in order to make it AIR-BR1310G-E-K9-R? OR Do I have to get a new unit?
Here is cisco link . Look under Table 12.
http://www.cisco.com...008008883b.html
The guide will also help you to choose right antenna for 1310
No, You can't . AIR-BR1310G-E-K9 comes with 13.5 dbi integrated antenna in it. while AIR-BR1310G-E-K9-R is the one where you can need to install antenna separately. FYI Both model are designed to install outdoor. In case you are not planning for multi-point bridging then you can go with these two model. Else you also have choice to swap it with external antenna model.
I hope this help.
Good luck
Please see my response inline
- It came without RG-6 (coaxial) cable and I could not find what the part code is. What part code I can use to get this?
- Is it possible to add RP/TNC connectors to AIR-BR1310G-E-K9 in order to make it AIR-BR1310G-E-K9-R? OR Do I have to get a new unit?
Here is cisco link . Look under Table 12.
Cisco Cables and choose the cable as per your need.
http://www.cisco.com...008008883b.html
The guide will also help you to choose right antenna for 1310
No, You can't . AIR-BR1310G-E-K9 comes with 13.5 dbi integrated antenna in it. while AIR-BR1310G-E-K9-R is the one where you can need to install antenna separately. FYI Both model are designed to install outdoor. In case you are not planning for multi-point bridging then you can go with these two model. Else you also have choice to swap it with external antenna model.
I hope this help.
Good luck
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
