Juniper IPv6 Static Route
Posted 28 January 2012 - 08:40 AM
I am studying IPv6 and I had problem about static routes.
I use the following:
[edit routing-options rib inet6.0]
root# set static route 2001:200:30:2::1/64 next-hop 2001:200:30:1::2
When I commit, then I got the "mask too short " error. When I change the 64 mask to 128, then commit successfull.
What is the reason for this, could you pls help me? Am I mixin about subnetting?
Posted 28 January 2012 - 10:44 AM
root# set static route 2001:200:30:2::0/64 next-hop 2001:200:30:1::2
With mask /64 you are setting a route toward network not toward single host.
Edited by Deda, 28 January 2012 - 10:47 AM.
Posted 14 February 2012 - 11:55 PM
Greetings and welcome to the world of Juniper Networks. This introductory section serves as a location to pass on to you some pertinent information concerning the Juniper Networks Technical Certification Program. In addition, you’ll find information about how the book itself is laid out and what it contains. Finally, we’ll review some technical information that you should already know before reading this book.
Posted 14 February 2012 - 11:56 PM
The Juniper Networks Technical Certification Program (JNTCP) consists of two platformspecific, multitiered tracks. Each exam track allows participants to demonstrate their competence with Juniper Networks technology through a combination of written proficiency and hands-on configuration exams. Successful candidates demonstrate a thorough understanding of Internet technology and Juniper Networks platform configuration and troubleshooting skills.The two JNTCP tracks focus on the M-series Routers & T-series Routing Platforms and the ERX Edge Routers, respectively. While some Juniper Networks customers and partners work with both platform families, it is most common to find individuals working with only one or the other platform. The two different certification tracks allow candidates to pursue specialized certifications, which focus on the platform type most pertinent to their job functions and experience. Candidates wishing to attain a certification on both platform families are welcome to do so, but are required to pass the exams from each track for their desired certification level.
Posted 14 February 2012 - 11:57 PM
The JNCIA-M certification is the first of the four-tiered M-series Routers & T-series Routing Platforms track. It is the entry-level certification designed for experienced networking professionals with beginner-to-intermediate knowledge of the Juniper Networks M-series and T-series routers and the JUNOS software. The JNCIA-M (exam code JN0-201) is a computer-based, multiple-choice exam delivered at Prometric testing centers globally for U.S.$125. It is a fastpaced exam that consists of 60 questions to be completed within 60 minutes. The current passing score is set at 70 percent.
Posted 14 February 2012 - 11:58 PM
The JNCIP-M is the first of the two one-day practical exams in the M-series Routers & T-series Routing Platforms track of the JNTCP. The goal of this challenging exam is to validate a candidate’s ability to successfully build an ISP network consisting of seven M-series routers and multiple EBGP neighbors. Over a period of eight hours, the successful candidate will perform system configuration on all seven routers, install an IGP, implement a well-designed IBGP, establish connections with all EBGP neighbors as specified, and configure the required routing policies correctly.This certification establishes candidates’ practical and theoretical knowledge of core Internet technologies and their ability to proficiently apply that knowledge in a hands-on environment. This exam is expected to meet the hands-on certification needs of the majority of Juniper Networks customers and partners. The more advanced JNCIE-M exam focuses on a set of specialized skills and addresses a much smaller group of candidates. You should carefully consider your certification goals and requirements, for you may find that the JNCIP-M exam is the highestlevel certification you need.
Posted 15 February 2012 - 12:00 AM
At the pinnacle of the M-series Routers & T-series Routing Platforms track is the one-day JNCIE-M practical exam. The E stands for Expert and they mean it—the exam is the most challenging and respected of its type in the industry. Maintaining the standard of excellence established over two years ago, the JNCIE-M certification continues to give candidates the opportunity to distinguish themselves as the truly elite of the networking world. Only a few have dared attempt this exam, and fewer still have passed. Introduction lithe new eight-hour format of the exam requires that candidates troubleshoot an existing and preconfigured ISP network consisting of 10 M-series routers. Candidates are then presented with additional configuration tasks appropriate for an expert-level engineer.The JNCIE-M (exam code CERT-JNCIE-M) is delivered at one of several Juniper Networks offices worldwide for U.S.$1,250. The current passing score is set at 80 percent.
The study topics for the JNCIE-M exam may include:
· Expert-level system operation, configuration, and troubleshooting
· Routing protocols—BGP, OSPF, IS-IS, and RIP
· Routing protocol redistribution
· Advanced routing policy implementation
· Firewall filters
· Class of service
Posted 15 February 2012 - 12:01 AM
If you are familiar with networking books, you might be a little surprised by the starting topic in Chapter 1. It is not the Open Systems Interconnection (OSI) model common to books in our industry, but instead the software that operates the router. In the following chapters, we dive headfirst into the details of running a network using the JUNOS software. This philosophy of knowing the basics is quite ingrained in the Juniper Networks Education courseware and certification exams, so we follow that assumption.
Posted 15 February 2012 - 12:04 AM
1) Local Preference
3) AS Path
Posted 15 February 2012 - 12:04 AM
Posted 15 February 2012 - 12:05 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users