Hello friend,
GNS3 is very useful software for cisco labs practice, it works on the basis of dynamips and real router OS. But one of it's demerit is that it will use high CPU process... So you cannot run it on Low processor PC. Also it disturbs other program to run smoothly. So i found an awesome idea to reduce the CPU usage by GNS3.. You can find this trick in this link.. http://techatnet.com...ue-and-best-ios
I found this very very useful.... Friends you can also try this.............
0
Trick to reduce GNS 3 CPU usage with best Idle PC Value and best IOS
Started by
techatnet
, Mar 06 2012 08:44 PM
gns3 gns3 high cpu usage red
1 reply to this topic
#2
martinlo
-
- Global Moderators
-
- 2601 posts
V.I.P. Member
- Gender:Male
- Location:Land Of 10,000 Lakes
Posted 19 March 2012 - 05:23 AM
There is a value called idle MAX, which is set to be 1500 by default.
if you lower it down to 500 or even 100 (min 10) you can get idle cpu low.
However, your routers will be slower and may not keep up with requests, so use it if you really have to and with caution.
if you lower it down to 500 or even 100 (min 10) you can get idle cpu low.
However, your routers will be slower and may not keep up with requests, so use it if you really have to and with caution.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
