9 replies to this topic

[brian10]

Hi

this is the new lab i got i failed and i guess most of u guys will get this lab

i guess the lab is easy and i guess most of the vendors have it now

and the lab is running in all centers

i am gonna start ccie studying again any 1 intrested can ping me

[brian10]

hi

i have a rns group created i would like yall to join it all who giving ccie exams

also i would request this forum if they want to make it famous to start with a chat blog a seperate section in this forum

PPoE
Layer 2 - PPoE
-configure PPPoE between R3-R4
-configure r3 (or r4) as the PPPoE server
-configure r4 (or r3) as the PPPoE client
-ensure r4 always gets the same IP address, cannot use DHCP
-ensure no interleaving in PPPoE
-there were one or two more PPPoE options required, but forgot










Section 1.4
-etherchannel configuration between SW1 and SW2 by using standard protocol , port fa0/24 should be selected as active port
-load-balance hash of source-destination mac address

PART 2
At the beginning , There was important note said;
• Finally, R3 should be able to ping all subnets and loopback0 of routers and switch, all loopback interface must to be seen /32
Layer 3 - OSPF
• in case R1/R5 goes down, ensure R4 can still reach all OSPF networks via R3 // virtual-links from R3 to R5 and R1 ???
2.2 EIGRP
eigrp yy and eigrp 100
no auto-summary

2.3 RIPv2
rip updates only as per topology
redistribute ospf into rip:
R4 must prefer R5 for routes to Sw1 l0
all other routes to go through r3
-redistribute OSPF routes into RIP in R5
-ensure R4 accesses SW1 Lo0 via R5 but all other routes should go through R3
2.4: Redistribute ospf int eigrp yy
R2 and R3 must have only external Eigrp routes from BB3 and the vlan 300 nework all other yy.yy.0.0/16 not in the eigrpyy domain must be seen as ext ospf route by R2 and R3

[brian10]

pls provide me with ur skype ids

my skype id is daniellleopolds@gmail.com

[mparacha1021]

Brian;

From which vendor you purchase the lab.

[brian10]

pcl and cciernslabs

[ccielabmem]

Dear Members,


Whoever is intrested to get ccie real exams + sollutions ,please contact me on the skype ciscoch32

[rdharia]

Hi,

I am looking for new ccie routing & switching lab K7 can u just provide me on my mail id dhariarahul@yahoo.co.in

[rdharia]

Can u just share the name of the group

[mexikan-loki]

If anyone is interested. I have all the K1 .... K7 and TS files. Im creating an CCIE RS study group, so if anyone of you guys want to join, just let me know. Im going to take the test on Dic 2012

loki666.ragnarok@gmail.com

[lastpoor]

me 2 i like to join group please lastpoor@hotmail.com
Regards