1 reply to this topic

[eklt]

I am not able to connect to the GUI on the Cisco Wireless Controller 2112. I noticed from the interface summary that the "GU" (GUI?) are all "No" on both the management and ap-manager interfaces. How to set them to "Yes" from the console (CLI)?

Thanks.


<<<<System Info>>>>

(Cisco Controller) >show interface summary

Interface Name Port Vlan Id IP Address Type Ap Mgr Gu
est
-------------------------------- ---- -------- --------------- ------- ------ --
---
ap-manager 1 untagged 10.1.4.62 Static Yes No

management 1 untagged 10.1.4.61 Static No No

virtual N/A N/A 1.1.1.1 Static No No


(Cisco Controller) > show network summary

RF-Network Name............................. RFGroup
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Mode..................... Disable
Ethernet Broadcast Mode..................... Disable
AP Multicast Mode........................... Multicast Address : 0.0.0.0
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Disable
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Enable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
--More-- or (q)uit
Over The Air Provisioning of AP's........... Disable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Fast SSID Change ........................... Disabled



(Cisco Controller) > show run-config
......

Interface Configuration
Interface Name................................... ap-manager
MAC Address...................................... 70:81:05:af:1d:20
IP Address....................................... 10.1.4.62
IP Netmask....................................... 255.255.252.0
IP Gateway....................................... 10.1.2.1
VLAN............................................. untagged
Physical Port.................................... 1
Primary DHCP Server.............................. 10.1.2.1
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No

Interface Name................................... management
MAC Address...................................... 70:81:05:af:1d:20
IP Address....................................... 10.1.4.61
IP Netmask....................................... 255.255.252.0
IP Gateway....................................... 10.1.2.1
VLAN............................................. untagged
Quarantine-vlan.................................. 0
Physical Port.................................... 1
Primary DHCP Server.............................. 10.1.2.1
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No
Guest Interface.................................. No

Interface Name................................... virtual
MAC Address...................................... 70:81:05:af:1d:20
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No

Edited by eklt, 25 June 2012 - 05:26 AM.

[sirkozz]

save config and reboot