HI ALL,
please i want to know if it is possible to NAT address pool on a cisco interface (45xx switch) that are not assigned to that particular interface? and how to do that?
for exemple :
ip add assigned to the interface (interface nat ouside) 10.10.10.2/30
outside ip @ pool nated 172.16.10.0/24
inside ip @ pool need to NAT 192.168.10.0/24
Cordiallly
0
1 reply to this topic
#1
stephlaf
-
- Members
-
- 8 posts
Newbie
- Gender:Male
- Location:douala - CAMEROON
-
Interests:networking , IT, CISCO
i am CCNA, CCNP, MCSA, NASA, TCP/IP ADMIN
ICDL,CCIE R&S.
Posted 01 August 2012 - 08:52 PM
#2
stephlaf
-
- Members
-
- 8 posts
Newbie
- Gender:Male
- Location:douala - CAMEROON
-
Interests:networking , IT, CISCO
i am CCNA, CCNP, MCSA, NASA, TCP/IP ADMIN
ICDL,CCIE R&S.
Posted 02 August 2012 - 06:37 PM
hi all
i found solution but to help others about the previous post, use loopback interfaces configurad with the network you want to NAT in such a way that the nated network will be in the routing table and can be nated out any ip address interface.
see you for next technology
CORDIALLY
i found solution but to help others about the previous post, use loopback interfaces configurad with the network you want to NAT in such a way that the nated network will be in the routing table and can be nated out any ip address interface.
see you for next technology
CORDIALLY
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
