Jump to content


Cisco ASA5550 Help

firewall asa5550 routing

  • Please log in to reply
2 replies to this topic

#1 want2beccie

want2beccie

    Newbie

  • Members
  • Pip
  • 4 posts

Posted 26 June 2013 - 12:52 AM

Hello,

 

I have a firewall question that I need some feedback on.  I recently inherited a network infrastructure that is not the norm or at least I have not seen this. 

 

I have your standard Cisco ASA 5550 firewall configuration with an outside interface, inside interface and DMZ interface.  The inside interface and the DMZ interface both have a direct connection to a Cisco 3750 switch.  Is there a way to separate those 2 networks from not talking to eachother?  Do I have to purchase another switch?

 

Thanks,

 


  • 0

#2 Netbee

Netbee

    Newbie

  • Members
  • Pip
  • 10 posts

Posted 26 September 2013 - 07:25 AM

Do both network are connected to same switch? Are you running any VLAN on switch? If so you can setup ASA so that not to allow traffic between these vlans.

 

Regards,


  • 0

#3 Cromac

Cromac

    Super Member

  • Members
  • PipPipPipPip
  • 840 posts
  • Gender:Male
  • Location:Czech Republic

Posted 26 September 2013 - 04:39 PM

I would probably say that DMZ and INSIDE interfaces are on different VLANs on C3750 unless the previous admin did somtthing wrong mellow.png .


  • 0






Also tagged with one or more of these keywords: firewall, asa5550, routing

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users